#include <rte_common.h>
#include <rte_config.h>
#include <rte_memory.h>
#include <rte_errno.h>

Data Structures
struct	rte_event_dev_info

struct	rte_event_dev_config

struct	rte_event_queue_conf

struct	rte_event_port_conf

struct	rte_event

struct	rte_event_dev_xstats_name

Macros
#define	RTE_EVENT_DEV_CAP_QUEUE_QOS (1ULL << 0)

#define	RTE_EVENT_DEV_CAP_EVENT_QOS (1ULL << 1)

#define	RTE_EVENT_DEV_CAP_DISTRIBUTED_SCHED (1ULL << 2)

#define	RTE_EVENT_DEV_CAP_QUEUE_ALL_TYPES (1ULL << 3)

#define	RTE_EVENT_DEV_CAP_BURST_MODE (1ULL << 4)

#define	RTE_EVENT_DEV_CAP_IMPLICIT_RELEASE_DISABLE (1ULL << 5)

#define	RTE_EVENT_DEV_CAP_NONSEQ_MODE (1ULL << 6)

#define	RTE_EVENT_DEV_CAP_RUNTIME_PORT_LINK (1ULL << 7)

#define	RTE_EVENT_DEV_CAP_MULTIPLE_QUEUE_PORT (1ULL << 8)

#define	RTE_EVENT_DEV_PRIORITY_HIGHEST 0

#define	RTE_EVENT_DEV_PRIORITY_NORMAL 128

#define	RTE_EVENT_DEV_PRIORITY_LOWEST 255

#define	RTE_EVENT_DEV_ATTR_PORT_COUNT 0

#define	RTE_EVENT_DEV_ATTR_QUEUE_COUNT 1

#define	RTE_EVENT_DEV_ATTR_STARTED 2

#define	RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT (1ULL << 0)

#define	RTE_EVENT_QUEUE_CFG_ALL_TYPES (1ULL << 0)

#define	RTE_EVENT_QUEUE_CFG_SINGLE_LINK (1ULL << 1)

#define	RTE_EVENT_QUEUE_ATTR_PRIORITY 0

#define	RTE_EVENT_QUEUE_ATTR_NB_ATOMIC_FLOWS 1

#define	RTE_EVENT_QUEUE_ATTR_NB_ATOMIC_ORDER_SEQUENCES 2

#define	RTE_EVENT_QUEUE_ATTR_EVENT_QUEUE_CFG 3

#define	RTE_EVENT_QUEUE_ATTR_SCHEDULE_TYPE 4

#define	RTE_EVENT_PORT_ATTR_ENQ_DEPTH 0

#define	RTE_EVENT_PORT_ATTR_DEQ_DEPTH 1

#define	RTE_EVENT_PORT_ATTR_NEW_EVENT_THRESHOLD 2

#define	RTE_SCHED_TYPE_ORDERED 0

#define	RTE_SCHED_TYPE_ATOMIC 1

#define	RTE_SCHED_TYPE_PARALLEL 2

#define	RTE_EVENT_TYPE_ETHDEV 0x0

#define	RTE_EVENT_TYPE_CRYPTODEV 0x1

#define	RTE_EVENT_TYPE_TIMER 0x2

#define	RTE_EVENT_TYPE_CPU 0x3

#define	RTE_EVENT_TYPE_ETH_RX_ADAPTER 0x4

#define	RTE_EVENT_TYPE_MAX 0x10

#define	RTE_EVENT_OP_NEW 0

#define	RTE_EVENT_OP_FORWARD 1

#define	RTE_EVENT_OP_RELEASE 2

#define	RTE_EVENT_ETH_RX_ADAPTER_CAP_INTERNAL_PORT 0x1

#define	RTE_EVENT_ETH_RX_ADAPTER_CAP_MULTI_EVENTQ 0x2

#define	RTE_EVENT_ETH_RX_ADAPTER_CAP_OVERRIDE_FLOW_ID 0x4

#define	RTE_EVENT_TIMER_ADAPTER_CAP_INTERNAL_PORT (1ULL << 0)

#define	RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_NEW 0x1

#define	RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_FWD 0x2

#define	RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_QP_EV_BIND 0x4

#define	RTE_EVENT_CRYPTO_ADAPTER_CAP_SESSION_PRIVATE_DATA 0x8

#define	RTE_EVENT_ETH_TX_ADAPTER_CAP_INTERNAL_PORT 0x1

#define	RTE_EVENT_DEV_XSTATS_NAME_SIZE 64

Typedefs
typedef void(*	eventdev_stop_flush_t) (uint8_t dev_id, struct rte_event event, void *arg)

Enumerations
enum	rte_event_dev_xstats_mode

Functions
uint8_t	rte_event_dev_count (void)

int	rte_event_dev_get_dev_id (const char *name)

int	rte_event_dev_socket_id (uint8_t dev_id)

int	rte_event_dev_info_get (uint8_t dev_id, struct rte_event_dev_info *dev_info)

int	rte_event_dev_attr_get (uint8_t dev_id, uint32_t attr_id, uint32_t *attr_value)

int	rte_event_dev_configure (uint8_t dev_id, const struct rte_event_dev_config *dev_conf)

int	rte_event_queue_default_conf_get (uint8_t dev_id, uint8_t queue_id, struct rte_event_queue_conf *queue_conf)

int	rte_event_queue_setup (uint8_t dev_id, uint8_t queue_id, const struct rte_event_queue_conf *queue_conf)

int	rte_event_queue_attr_get (uint8_t dev_id, uint8_t queue_id, uint32_t attr_id, uint32_t *attr_value)

int	rte_event_port_default_conf_get (uint8_t dev_id, uint8_t port_id, struct rte_event_port_conf *port_conf)

int	rte_event_port_setup (uint8_t dev_id, uint8_t port_id, const struct rte_event_port_conf *port_conf)

int	rte_event_port_attr_get (uint8_t dev_id, uint8_t port_id, uint32_t attr_id, uint32_t *attr_value)

int	rte_event_dev_start (uint8_t dev_id)

void	rte_event_dev_stop (uint8_t dev_id)

int	rte_event_dev_stop_flush_callback_register (uint8_t dev_id, eventdev_stop_flush_t callback, void *userdata)

int	rte_event_dev_close (uint8_t dev_id)

int	rte_event_eth_rx_adapter_caps_get (uint8_t dev_id, uint16_t eth_port_id, uint32_t *caps)

int	rte_event_timer_adapter_caps_get (uint8_t dev_id, uint32_t *caps)

int	rte_event_crypto_adapter_caps_get (uint8_t dev_id, uint8_t cdev_id, uint32_t *caps)

int	rte_event_eth_tx_adapter_caps_get (uint8_t dev_id, uint16_t eth_port_id, uint32_t *caps)

static uint16_t	rte_event_enqueue_burst (uint8_t dev_id, uint8_t port_id, const struct rte_event ev[], uint16_t nb_events)

static uint16_t	rte_event_enqueue_new_burst (uint8_t dev_id, uint8_t port_id, const struct rte_event ev[], uint16_t nb_events)

static uint16_t	rte_event_enqueue_forward_burst (uint8_t dev_id, uint8_t port_id, const struct rte_event ev[], uint16_t nb_events)

int	rte_event_dequeue_timeout_ticks (uint8_t dev_id, uint64_t ns, uint64_t *timeout_ticks)

static uint16_t	rte_event_dequeue_burst (uint8_t dev_id, uint8_t port_id, struct rte_event ev[], uint16_t nb_events, uint64_t timeout_ticks)

int	rte_event_port_link (uint8_t dev_id, uint8_t port_id, const uint8_t queues[], const uint8_t priorities[], uint16_t nb_links)

int	rte_event_port_unlink (uint8_t dev_id, uint8_t port_id, uint8_t queues[], uint16_t nb_unlinks)

int	rte_event_port_unlinks_in_progress (uint8_t dev_id, uint8_t port_id)

int	rte_event_port_links_get (uint8_t dev_id, uint8_t port_id, uint8_t queues[], uint8_t priorities[])

int	rte_event_dev_service_id_get (uint8_t dev_id, uint32_t *service_id)

int	rte_event_dev_dump (uint8_t dev_id, FILE *f)

int	rte_event_dev_xstats_names_get (uint8_t dev_id, enum rte_event_dev_xstats_mode mode, uint8_t queue_port_id, struct rte_event_dev_xstats_name xstats_names, unsigned int ids, unsigned int size)

int	rte_event_dev_xstats_get (uint8_t dev_id, enum rte_event_dev_xstats_mode mode, uint8_t queue_port_id, const unsigned int ids[], uint64_t values[], unsigned int n)

uint64_t	rte_event_dev_xstats_by_name_get (uint8_t dev_id, const char name, unsigned int id)

int	rte_event_dev_xstats_reset (uint8_t dev_id, enum rte_event_dev_xstats_mode mode, int16_t queue_port_id, const uint32_t ids[], uint32_t nb_ids)

int	rte_event_dev_selftest (uint8_t dev_id)

Detailed Description

RTE Event Device API

In a polling model, lcores poll ethdev ports and associated rx queues directly to look for packet. In an event driven model, by contrast, lcores call the scheduler that selects packets for them based on programmer specified criteria. Eventdev library adds support for event driven programming model, which offer applications automatic multicore scaling, dynamic load balancing, pipelining, packet ingress order maintenance and synchronization services to simplify application packet processing.

The Event Device API is composed of two parts:

The application-oriented Event API that includes functions to setup an event device (configure it, setup its queues, ports and start it), to establish the link between queues to port and to receive events, and so on.
The driver-oriented Event API that exports a function allowing an event poll Mode Driver (PMD) to simultaneously register itself as an event device driver.

Event device components:

                +-----------------+
                | +-------------+ |
   +-------+    | |    flow 0   | |
   |Packet |    | +-------------+ |
   |event  |    | +-------------+ |
   |       |    | |    flow 1   | |port_link(port0, queue0)
   +-------+    | +-------------+ |     |     +--------+
   +-------+    | +-------------+ o-----v-----o        |dequeue +------+
   |Crypto |    | |    flow n   | |           | event  +------->|Core 0|
   |work   |    | +-------------+ o----+      | port 0 |        |      |
   |done ev|    |  event queue 0  |    |      +--------+        +------+
   +-------+    +-----------------+    |
   +-------+                           |
   |Timer  |    +-----------------+    |      +--------+
   |expiry |    | +-------------+ |    +------o        |dequeue +------+
   |event  |    | |    flow 0   | o-----------o event  +------->|Core 1|
   +-------+    | +-------------+ |      +----o port 1 |        |      |
  Event enqueue | +-------------+ |      |    +--------+        +------+
o-------------> | |    flow 1   | |      |
   enqueue(     | +-------------+ |      |
   queue_id,    |                 |      |    +--------+        +------+
   flow_id,     | +-------------+ |      |    |        |dequeue |Core 2|
   sched_type,  | |    flow n   | o-----------o event  +------->|      |
   event_type,  | +-------------+ |      |    | port 2 |        +------+
   subev_type,  |  event queue 1  |      |    +--------+
   event)       +-----------------+      |    +--------+
                                         |    |        |dequeue +------+
   +-------+    +-----------------+      |    | event  +------->|Core n|
   |Core   |    | +-------------+ o-----------o port n |        |      |
   |(SW)   |    | |    flow 0   | |      |    +--------+        +--+---+
   |event  |    | +-------------+ |      |                         |
   +-------+    | +-------------+ |      |                         |
       ^        | |    flow 1   | |      |                         |
       |        | +-------------+ o------+                         |
       |        | +-------------+ |                                |
       |        | |    flow n   | |                                |
       |        | +-------------+ |                                |
       |        |  event queue n  |                                |
       |        +-----------------+                                |
       |                                                           |
       +-----------------------------------------------------------+

Event device: A hardware or software-based event scheduler.

Event: A unit of scheduling that encapsulates a packet or other datatype like SW generated event from the CPU, Crypto work completion notification, Timer expiry event notification etc as well as metadata. The metadata includes flow ID, scheduling type, event priority, event_type, sub_event_type etc.

Event queue: A queue containing events that are scheduled by the event dev. An event queue contains events of different flows associated with scheduling types, such as atomic, ordered, or parallel.

Event port: An application's interface into the event dev for enqueue and dequeue operations. Each event port can be linked with one or more event queues for dequeue operations.

By default, all the functions of the Event Device API exported by a PMD are lock-free functions which assume to not be invoked in parallel on different logical cores to work on the same target object. For instance, the dequeue function of a PMD cannot be invoked in parallel on two logical cores to operates on same event port. Of course, this function can be invoked in parallel by different logical cores on different ports. It is the responsibility of the upper level application to enforce this rule.

In all functions of the Event API, the Event device is designated by an integer >= 0 named the device identifier dev_id

At the Event driver level, Event devices are represented by a generic data structure of type rte_event_dev.

Event devices are dynamically registered during the PCI/SoC device probing phase performed at EAL initialization time. When an Event device is being probed, a rte_event_dev structure and a new device identifier are allocated for that device. Then, the event_dev_init() function supplied by the Event driver matching the probed device is invoked to properly initialize the device.

The role of the device init function consists of resetting the hardware or software event driver implementations.

If the device init operation is successful, the correspondence between the device identifier assigned to the new device and its associated rte_event_dev structure is effectively registered. Otherwise, both the rte_event_dev structure and the device identifier are freed.

The functions exported by the application Event API to setup a device designated by its device identifier must be invoked in the following order:

Then, the application can invoke, in any order, the functions exported by the Event API to schedule events, dequeue events, enqueue events, change event queue(s) to event port [un]link establishment and so on.

Application may use rte_event_[queue/port]_default_conf_get() to get the default configuration to set up an event queue or event port by overriding few default values.

If the application wants to change the configuration (i.e. call rte_event_dev_configure(), rte_event_queue_setup(), or rte_event_port_setup()), it must call rte_event_dev_stop() first to stop the device and then do the reconfiguration before calling rte_event_dev_start() again. The schedule, enqueue and dequeue functions should not be invoked when the device is stopped.

Finally, an application can close an Event device by invoking the rte_event_dev_close() function.

Each function of the application Event API invokes a specific function of the PMD that controls the target device designated by its device identifier.

For this purpose, all device-specific functions of an Event driver are supplied through a set of pointers contained in a generic structure of type event_dev_ops. The address of the event_dev_ops structure is stored in the rte_event_dev structure by the device init function of the Event driver, which is invoked during the PCI/SoC device probing phase, as explained earlier.

In other words, each function of the Event API simply retrieves the rte_event_dev structure associated with the device identifier and performs an indirect invocation of the corresponding driver function supplied in the event_dev_ops structure of the rte_event_dev structure.

For performance reasons, the address of the fast-path functions of the Event driver is not contained in the event_dev_ops structure. Instead, they are directly stored at the beginning of the rte_event_dev structure to avoid an extra indirect memory access during their invocation.

RTE event device drivers do not use interrupts for enqueue or dequeue operation. Instead, Event drivers export Poll-Mode enqueue and dequeue functions to applications.

The events are injected to event device through enqueue operation by event producers in the system. The typical event producers are ethdev subsystem for generating packet events, CPU(SW) for generating events based on different stages of application processing, cryptodev for generating crypto work completion notification etc

The dequeue operation gets one or more events from the event ports. The application process the events and send to downstream event queue through rte_event_enqueue_burst() if it is an intermediate stage of event processing, on the final stage, the application may send to different subsystem like ethdev to send the packet/event on the wire using ethdev rte_eth_tx_burst() API.

The point at which events are scheduled to ports depends on the device. For hardware devices, scheduling occurs asynchronously without any software intervention. Software schedulers can either be distributed (each worker thread schedules events to its own port) or centralized (a dedicated thread schedules to all ports). Distributed software schedulers perform the scheduling in rte_event_dequeue_burst(), whereas centralized scheduler logic need a dedicated service core for scheduling. The RTE_EVENT_DEV_CAP_DISTRIBUTED_SCHED capability flag is not set indicates the device is centralized and thus needs a dedicated scheduling thread that repeatedly calls software specific scheduling function.

An event driven worker thread has following typical workflow on fastpath:

while (1) {
   rte_event_dequeue_burst(...);
   (event processing)
   rte_event_enqueue_burst(...);
}

Definition in file rte_eventdev.h.

Macro Definition Documentation

◆ RTE_EVENT_DEV_CAP_QUEUE_QOS

#define RTE_EVENT_DEV_CAP_QUEUE_QOS (1ULL << 0)

Event scheduling prioritization is based on the priority associated with each event queue.

See also: rte_event_queue_setup()

Definition at line 223 of file rte_eventdev.h.

◆ RTE_EVENT_DEV_CAP_EVENT_QOS

#define RTE_EVENT_DEV_CAP_EVENT_QOS (1ULL << 1)

Event scheduling prioritization is based on the priority associated with each event. Priority of each event is supplied in rte_event structure on each enqueue operation.

See also: rte_event_enqueue_burst()

Definition at line 229 of file rte_eventdev.h.

◆ RTE_EVENT_DEV_CAP_DISTRIBUTED_SCHED

#define RTE_EVENT_DEV_CAP_DISTRIBUTED_SCHED (1ULL << 2)

Event device operates in distributed scheduling mode. In distributed scheduling mode, event scheduling happens in HW or rte_event_dequeue_burst() or the combination of these two. If the flag is not set then eventdev is centralized and thus needs a dedicated service core that acts as a scheduling thread .

See also: rte_event_dequeue_burst()

Examples: examples/eventdev_pipeline/pipeline_worker_generic.c, and examples/eventdev_pipeline/pipeline_worker_tx.c.

Definition at line 236 of file rte_eventdev.h.

◆ RTE_EVENT_DEV_CAP_QUEUE_ALL_TYPES

#define RTE_EVENT_DEV_CAP_QUEUE_ALL_TYPES (1ULL << 3)

Event device is capable of enqueuing events of any type to any queue. If this capability is not set, the queue only supports events of the RTE_SCHED_TYPE_ type that it was created with.

See also: RTE_SCHED_TYPE_* values

Examples: examples/eventdev_pipeline/pipeline_worker_generic.c, and examples/eventdev_pipeline/pipeline_worker_tx.c.

Definition at line 245 of file rte_eventdev.h.

◆ RTE_EVENT_DEV_CAP_BURST_MODE

#define RTE_EVENT_DEV_CAP_BURST_MODE (1ULL << 4)

Event device is capable of operating in burst mode for enqueue(forward, release) and dequeue operation. If this capability is not set, application still uses the rte_event_dequeue_burst() and rte_event_enqueue_burst() but PMD accepts only one event at a time.

See also: rte_event_dequeue_burst() rte_event_enqueue_burst()

Examples: examples/eventdev_pipeline/main.c.

Definition at line 252 of file rte_eventdev.h.

◆ RTE_EVENT_DEV_CAP_IMPLICIT_RELEASE_DISABLE

#define RTE_EVENT_DEV_CAP_IMPLICIT_RELEASE_DISABLE (1ULL << 5)

Event device ports support disabling the implicit release feature, in which the port will release all unreleased events in its dequeue operation. If this capability is set and the port is configured with implicit release disabled, the application is responsible for explicitly releasing events using either the RTE_EVENT_OP_FORWARD or the RTE_EVENT_OP_RELEASE event enqueue operations.

See also: rte_event_dequeue_burst() rte_event_enqueue_burst()

Examples: examples/eventdev_pipeline/pipeline_worker_generic.c.

Definition at line 260 of file rte_eventdev.h.

◆ RTE_EVENT_DEV_CAP_NONSEQ_MODE

#define RTE_EVENT_DEV_CAP_NONSEQ_MODE (1ULL << 6)

Event device is capable of operating in none sequential mode. The path of the event is not necessary to be sequential. Application can change the path of event at runtime. If the flag is not set, then event each event will follow a path from queue 0 to queue 1 to queue 2 etc. If the flag is set, events may be sent to queues in any order. If the flag is not set, the eventdev will return an error when the application enqueues an event for a qid which is not the next in the sequence.

Definition at line 271 of file rte_eventdev.h.

◆ RTE_EVENT_DEV_CAP_RUNTIME_PORT_LINK

#define RTE_EVENT_DEV_CAP_RUNTIME_PORT_LINK (1ULL << 7)

Event device is capable of configuring the queue/port link at runtime. If the flag is not set, the eventdev queue/port link is only can be configured during initialization.

Definition at line 281 of file rte_eventdev.h.

◆ RTE_EVENT_DEV_CAP_MULTIPLE_QUEUE_PORT

#define RTE_EVENT_DEV_CAP_MULTIPLE_QUEUE_PORT (1ULL << 8)

Event device is capable of setting up the link between multiple queue with single port. If the flag is not set, the eventdev can only map a single queue to each port or map a single queue to many port.

Definition at line 287 of file rte_eventdev.h.

◆ RTE_EVENT_DEV_PRIORITY_HIGHEST

#define RTE_EVENT_DEV_PRIORITY_HIGHEST 0

Highest priority expressed across eventdev subsystem

See also: rte_event_queue_setup(), rte_event_enqueue_burst(); rte_event_port_link()

Examples: examples/eventdev_pipeline/pipeline_worker_generic.c.

Definition at line 294 of file rte_eventdev.h.

◆ RTE_EVENT_DEV_PRIORITY_NORMAL

#define RTE_EVENT_DEV_PRIORITY_NORMAL 128

Normal priority expressed across eventdev subsystem

See also: rte_event_queue_setup(), rte_event_enqueue_burst(); rte_event_port_link()

Examples: examples/eventdev_pipeline/pipeline_worker_generic.c, and examples/eventdev_pipeline/pipeline_worker_tx.c.

Definition at line 299 of file rte_eventdev.h.

◆ RTE_EVENT_DEV_PRIORITY_LOWEST

#define RTE_EVENT_DEV_PRIORITY_LOWEST 255

Lowest priority expressed across eventdev subsystem

See also: rte_event_queue_setup(), rte_event_enqueue_burst(); rte_event_port_link()

Examples: examples/eventdev_pipeline/pipeline_worker_generic.c, and examples/eventdev_pipeline/pipeline_worker_tx.c.

Definition at line 304 of file rte_eventdev.h.

◆ RTE_EVENT_DEV_ATTR_PORT_COUNT

#define RTE_EVENT_DEV_ATTR_PORT_COUNT 0

The count of ports.

Definition at line 412 of file rte_eventdev.h.

◆ RTE_EVENT_DEV_ATTR_QUEUE_COUNT

#define RTE_EVENT_DEV_ATTR_QUEUE_COUNT 1

The count of queues.

Definition at line 416 of file rte_eventdev.h.

◆ RTE_EVENT_DEV_ATTR_STARTED

#define RTE_EVENT_DEV_ATTR_STARTED 2

The status of the device, zero for stopped, non-zero for started.

Definition at line 420 of file rte_eventdev.h.

◆ RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT

#define RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT (1ULL << 0)

Override the global dequeue_timeout_ns and use per dequeue timeout in ns.

See also: rte_event_dequeue_timeout_ticks(), rte_event_dequeue_burst()

Definition at line 440 of file rte_eventdev.h.

◆ RTE_EVENT_QUEUE_CFG_ALL_TYPES

#define RTE_EVENT_QUEUE_CFG_ALL_TYPES (1ULL << 0)

Allow ATOMIC,ORDERED,PARALLEL schedule type enqueue

See also: RTE_SCHED_TYPE_ORDERED, RTE_SCHED_TYPE_ATOMIC, RTE_SCHED_TYPE_PARALLEL; rte_event_enqueue_burst()

Examples: examples/eventdev_pipeline/pipeline_worker_tx.c.

Definition at line 525 of file rte_eventdev.h.

◆ RTE_EVENT_QUEUE_CFG_SINGLE_LINK

#define RTE_EVENT_QUEUE_CFG_SINGLE_LINK (1ULL << 1)

This event queue links only to a single event port.

See also: rte_event_port_setup(), rte_event_port_link()

Examples: examples/eventdev_pipeline/pipeline_worker_generic.c.

Definition at line 531 of file rte_eventdev.h.

◆ RTE_EVENT_QUEUE_ATTR_PRIORITY

#define RTE_EVENT_QUEUE_ATTR_PRIORITY 0

The priority of the queue.

Definition at line 629 of file rte_eventdev.h.

◆ RTE_EVENT_QUEUE_ATTR_NB_ATOMIC_FLOWS

#define RTE_EVENT_QUEUE_ATTR_NB_ATOMIC_FLOWS 1

The number of atomic flows configured for the queue.

Definition at line 633 of file rte_eventdev.h.

◆ RTE_EVENT_QUEUE_ATTR_NB_ATOMIC_ORDER_SEQUENCES

#define RTE_EVENT_QUEUE_ATTR_NB_ATOMIC_ORDER_SEQUENCES 2

The number of atomic order sequences configured for the queue.

Definition at line 637 of file rte_eventdev.h.

◆ RTE_EVENT_QUEUE_ATTR_EVENT_QUEUE_CFG

#define RTE_EVENT_QUEUE_ATTR_EVENT_QUEUE_CFG 3

The cfg flags for the queue.

Definition at line 641 of file rte_eventdev.h.

◆ RTE_EVENT_QUEUE_ATTR_SCHEDULE_TYPE

#define RTE_EVENT_QUEUE_ATTR_SCHEDULE_TYPE 4

The schedule type of the queue.

Definition at line 645 of file rte_eventdev.h.

◆ RTE_EVENT_PORT_ATTR_ENQ_DEPTH

#define RTE_EVENT_PORT_ATTR_ENQ_DEPTH 0

The queue depth of the port on the enqueue side

Definition at line 762 of file rte_eventdev.h.

◆ RTE_EVENT_PORT_ATTR_DEQ_DEPTH

#define RTE_EVENT_PORT_ATTR_DEQ_DEPTH 1

The queue depth of the port on the dequeue side

Definition at line 766 of file rte_eventdev.h.

◆ RTE_EVENT_PORT_ATTR_NEW_EVENT_THRESHOLD

#define RTE_EVENT_PORT_ATTR_NEW_EVENT_THRESHOLD 2

The new event threshold of the port

Definition at line 770 of file rte_eventdev.h.

◆ RTE_SCHED_TYPE_ORDERED

#define RTE_SCHED_TYPE_ORDERED 0

Ordered scheduling

Events from an ordered flow of an event queue can be scheduled to multiple ports for concurrent processing while maintaining the original event order. This scheme enables the user to achieve high single flow throughput by avoiding SW synchronization for ordering between ports which bound to cores.

The source flow ordering from an event queue is maintained when events are enqueued to their destination queue within the same ordered flow context. An event port holds the context until application call rte_event_dequeue_burst() from the same port, which implicitly releases the context. User may allow the scheduler to release the context earlier than that by invoking rte_event_enqueue_burst() with RTE_EVENT_OP_RELEASE operation.

Events from the source queue appear in their original order when dequeued from a destination queue. Event ordering is based on the received event(s), but also other (newly allocated or stored) events are ordered when enqueued within the same ordered context. Events not enqueued (e.g. released or stored) within the context are considered missing from reordering and are skipped at this time (but can be ordered again within another context).

See also: rte_event_queue_setup(), rte_event_dequeue_burst(), RTE_EVENT_OP_RELEASE

Examples: examples/eventdev_pipeline/main.c, examples/eventdev_pipeline/pipeline_worker_generic.c, and examples/eventdev_pipeline/pipeline_worker_tx.c.

Definition at line 881 of file rte_eventdev.h.

◆ RTE_SCHED_TYPE_ATOMIC

#define RTE_SCHED_TYPE_ATOMIC 1

Atomic scheduling

Events from an atomic flow of an event queue can be scheduled only to a single port at a time. The port is guaranteed to have exclusive (atomic) access to the associated flow context, which enables the user to avoid SW synchronization. Atomic flows also help to maintain event ordering since only one port at a time can process events from a flow of an event queue.

The atomic queue synchronization context is dedicated to the port until application call rte_event_dequeue_burst() from the same port, which implicitly releases the context. User may allow the scheduler to release the context earlier than that by invoking rte_event_enqueue_burst() with RTE_EVENT_OP_RELEASE operation.

See also: rte_event_queue_setup(), rte_event_dequeue_burst(), RTE_EVENT_OP_RELEASE

Examples: examples/eventdev_pipeline/main.c, and examples/eventdev_pipeline/pipeline_worker_tx.c.

Definition at line 908 of file rte_eventdev.h.

◆ RTE_SCHED_TYPE_PARALLEL

#define RTE_SCHED_TYPE_PARALLEL 2

Parallel scheduling

The scheduler performs priority scheduling, load balancing, etc. functions but does not provide additional event synchronization or ordering. It is free to schedule events from a single parallel flow of an event queue to multiple events ports for concurrent processing. The application is responsible for flow context synchronization and event ordering (SW synchronization).

See also: rte_event_queue_setup(), rte_event_dequeue_burst()

Examples: examples/eventdev_pipeline/main.c, examples/eventdev_pipeline/pipeline_worker_generic.c, and examples/eventdev_pipeline/pipeline_worker_tx.c.

Definition at line 927 of file rte_eventdev.h.

◆ RTE_EVENT_TYPE_ETHDEV

#define RTE_EVENT_TYPE_ETHDEV 0x0

The event generated from ethdev subsystem

Definition at line 941 of file rte_eventdev.h.

◆ RTE_EVENT_TYPE_CRYPTODEV

#define RTE_EVENT_TYPE_CRYPTODEV 0x1

The event generated from crypodev subsystem

Definition at line 943 of file rte_eventdev.h.

◆ RTE_EVENT_TYPE_TIMER

#define RTE_EVENT_TYPE_TIMER 0x2

The event generated from event timer adapter

Definition at line 945 of file rte_eventdev.h.

◆ RTE_EVENT_TYPE_CPU

#define RTE_EVENT_TYPE_CPU 0x3

The event generated from cpu for pipelining. Application may use sub_event_type to further classify the event

Examples: examples/eventdev_pipeline/pipeline_worker_tx.c.

Definition at line 947 of file rte_eventdev.h.

◆ RTE_EVENT_TYPE_ETH_RX_ADAPTER

#define RTE_EVENT_TYPE_ETH_RX_ADAPTER 0x4

The event generated from event eth Rx adapter

Definition at line 951 of file rte_eventdev.h.

◆ RTE_EVENT_TYPE_MAX

#define RTE_EVENT_TYPE_MAX 0x10

Maximum number of event types

Definition at line 953 of file rte_eventdev.h.

◆ RTE_EVENT_OP_NEW

#define RTE_EVENT_OP_NEW 0

The event producers use this operation to inject a new event to the event device.

Definition at line 957 of file rte_eventdev.h.

◆ RTE_EVENT_OP_FORWARD

#define RTE_EVENT_OP_FORWARD 1

The CPU use this operation to forward the event to different event queue or change to new application specific flow or schedule type to enable pipelining.

This operation must only be enqueued to the same port that the event to be forwarded was dequeued from.

Examples: examples/eventdev_pipeline/pipeline_worker_generic.c, and examples/eventdev_pipeline/pipeline_worker_tx.c.

Definition at line 961 of file rte_eventdev.h.

◆ RTE_EVENT_OP_RELEASE

#define RTE_EVENT_OP_RELEASE 2

Release the flow context associated with the schedule type.

If current flow's scheduler type method is RTE_SCHED_TYPE_ATOMIC then this function hints the scheduler that the user has completed critical section processing in the current atomic context. The scheduler is now allowed to schedule events from the same flow from an event queue to another port. However, the context may be still held until the next rte_event_dequeue_burst() call, this call allows but does not force the scheduler to release the context early.

Early atomic context release may increase parallelism and thus system performance, but the user needs to design carefully the split into critical vs non-critical sections.

If current flow's scheduler type method is RTE_SCHED_TYPE_ORDERED then this function hints the scheduler that the user has done all that need to maintain event order in the current ordered context. The scheduler is allowed to release the ordered context of this port and avoid reordering any following enqueues.

Early ordered context release may increase parallelism and thus system performance.

If current flow's scheduler type method is RTE_SCHED_TYPE_PARALLEL or no scheduling context is held then this function may be an NOOP, depending on the implementation.

This operation must only be enqueued to the same port that the event to be released was dequeued from.

Examples: examples/eventdev_pipeline/pipeline_worker_tx.c.

Definition at line 969 of file rte_eventdev.h.

◆ RTE_EVENT_ETH_RX_ADAPTER_CAP_INTERNAL_PORT

#define RTE_EVENT_ETH_RX_ADAPTER_CAP_INTERNAL_PORT 0x1

This flag is sent when the packet transfer mechanism is in HW. Ethdev can send packets to the event device using internal event port.

Examples: examples/eventdev_pipeline/pipeline_worker_generic.c, and examples/eventdev_pipeline/pipeline_worker_tx.c.

Definition at line 1079 of file rte_eventdev.h.

◆ RTE_EVENT_ETH_RX_ADAPTER_CAP_MULTI_EVENTQ

#define RTE_EVENT_ETH_RX_ADAPTER_CAP_MULTI_EVENTQ 0x2

Adapter supports multiple event queues per ethdev. Every ethdev Rx queue can be connected to a unique event queue.

Definition at line 1083 of file rte_eventdev.h.

◆ RTE_EVENT_ETH_RX_ADAPTER_CAP_OVERRIDE_FLOW_ID

#define RTE_EVENT_ETH_RX_ADAPTER_CAP_OVERRIDE_FLOW_ID 0x4

The application can override the adapter generated flow ID in the event. This flow ID can be specified when adding an ethdev Rx queue to the adapter using the ev member of struct rte_event_eth_rx_adapter

See also: struct rte_event_eth_rx_adapter_queue_conf::ev; struct rte_event_eth_rx_adapter_queue_conf::rx_queue_flags

Definition at line 1087 of file rte_eventdev.h.

◆ RTE_EVENT_TIMER_ADAPTER_CAP_INTERNAL_PORT

#define RTE_EVENT_TIMER_ADAPTER_CAP_INTERNAL_PORT (1ULL << 0)

This flag is set when the timer mechanism is in HW.

Definition at line 1118 of file rte_eventdev.h.

◆ RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_NEW

#define RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_NEW 0x1

Flag indicates HW is capable of generating events in RTE_EVENT_OP_NEW enqueue operation. Cryptodev will send packets to the event device as new events using an internal event port.

Definition at line 1138 of file rte_eventdev.h.

◆ RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_FWD

#define RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_FWD 0x2

Flag indicates HW is capable of generating events in RTE_EVENT_OP_FORWARD enqueue operation. Cryptodev will send packets to the event device as forwarded event using an internal event port.

Definition at line 1145 of file rte_eventdev.h.

◆ RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_QP_EV_BIND

#define RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_QP_EV_BIND 0x4

Flag indicates HW is capable of mapping crypto queue pair to event queue.

Definition at line 1152 of file rte_eventdev.h.

◆ RTE_EVENT_CRYPTO_ADAPTER_CAP_SESSION_PRIVATE_DATA

#define RTE_EVENT_CRYPTO_ADAPTER_CAP_SESSION_PRIVATE_DATA 0x8

Flag indicates HW/SW supports a mechanism to store and retrieve the private data information along with the crypto session.

Definition at line 1157 of file rte_eventdev.h.

◆ RTE_EVENT_ETH_TX_ADAPTER_CAP_INTERNAL_PORT

#define RTE_EVENT_ETH_TX_ADAPTER_CAP_INTERNAL_PORT 0x1

This flag is sent when the PMD supports a packet transmit callback

Examples: examples/eventdev_pipeline/main.c.

Definition at line 1187 of file rte_eventdev.h.

◆ RTE_EVENT_DEV_XSTATS_NAME_SIZE

#define RTE_EVENT_DEV_XSTATS_NAME_SIZE 64

Maximum name length for extended statistics counters

Definition at line 1820 of file rte_eventdev.h.

Typedef Documentation

◆ eventdev_stop_flush_t

typedef void(* eventdev_stop_flush_t) (uint8_t dev_id, struct rte_event event, void *arg)

Callback function called during rte_event_dev_stop(), invoked once per flushed event.

Definition at line 832 of file rte_eventdev.h.

Enumeration Type Documentation

◆ rte_event_dev_xstats_mode

enum rte_event_dev_xstats_mode

Selects the component of the eventdev to retrieve statistics from.

Definition at line 1825 of file rte_eventdev.h.

Function Documentation

◆ rte_event_dev_count()

uint8_t rte_event_dev_count ( void )

Get the total number of event devices that have been successfully initialised.

Returns: The total number of usable event devices.

Examples: examples/eventdev_pipeline/main.c, examples/eventdev_pipeline/pipeline_worker_generic.c, and examples/eventdev_pipeline/pipeline_worker_tx.c.

◆ rte_event_dev_get_dev_id()

int rte_event_dev_get_dev_id ( const char * name )

Get the device identifier for the named event device.

Parameters

name	Event device name to select the event device identifier.

Returns

Returns event device identifier on success.

<0: Failure to find named event device.

◆ rte_event_dev_socket_id()

int rte_event_dev_socket_id ( uint8_t dev_id )

Return the NUMA socket to which a device is connected.

Parameters

dev_id The identifier of the device.

Returns: The NUMA socket id to which the device is connected or a default of zero if the socket could not be determined. -(-EINVAL) dev_id value is out of range.

◆ rte_event_dev_info_get()

int rte_event_dev_info_get	(	uint8_t	dev_id,
		struct rte_event_dev_info *	dev_info
	)

Retrieve the contextual information of an event device.

Parameters

	dev_id	The identifier of the device.
[out]	dev_info	A pointer to a structure of type rte_event_dev_info to be filled with the contextual information of the device.

Returns

0: Success, driver updates the contextual information of the event device
<0: Error code returned by the driver info get function.

Examples: examples/eventdev_pipeline/main.c, examples/eventdev_pipeline/pipeline_worker_generic.c, and examples/eventdev_pipeline/pipeline_worker_tx.c.

◆ rte_event_dev_attr_get()

int rte_event_dev_attr_get	(	uint8_t	dev_id,
		uint32_t	attr_id,
		uint32_t *	attr_value
	)

Get an attribute from a device.

Parameters

	dev_id	Eventdev id
	attr_id	The attribute ID to retrieve
[out]	attr_value	A pointer that will be filled in with the attribute value if successful.

Returns

0: Successfully retrieved attribute value
-EINVAL: Invalid device or attr_id provided, or attr_value is NULL

◆ rte_event_dev_configure()

int rte_event_dev_configure	(	uint8_t	dev_id,
		const struct rte_event_dev_config *	dev_conf
	)

Configure an event device.

This function must be invoked first before any other function in the API. This function can also be re-invoked when a device is in the stopped state.

The caller may use rte_event_dev_info_get() to get the capability of each resources available for this event device.

Parameters

dev_id	The identifier of the device to configure.
dev_conf	The event device configuration structure.

Returns

0: Success, device configured.
<0: Error code returned by the driver configuration function.

Examples: examples/eventdev_pipeline/pipeline_worker_generic.c, and examples/eventdev_pipeline/pipeline_worker_tx.c.

◆ rte_event_queue_default_conf_get()

int rte_event_queue_default_conf_get	(	uint8_t	dev_id,
		uint8_t	queue_id,
		struct rte_event_queue_conf *	queue_conf
	)

Retrieve the default configuration information of an event queue designated by its queue_id from the event driver for an event device.

This function intended to be used in conjunction with rte_event_queue_setup() where caller needs to set up the queue by overriding few default values.

Parameters

	dev_id	The identifier of the device.
	queue_id	The index of the event queue to get the configuration information. The value must be in the range [0, nb_event_queues - 1] previously supplied to rte_event_dev_configure().
[out]	queue_conf	The pointer to the default event queue configuration data.

Returns

0: Success, driver updates the default event queue configuration data.
<0: Error code returned by the driver info get function.

See also: rte_event_queue_setup()

◆ rte_event_queue_setup()

int rte_event_queue_setup	(	uint8_t	dev_id,
		uint8_t	queue_id,
		const struct rte_event_queue_conf *	queue_conf
	)

Allocate and set up an event queue for an event device.

Parameters

dev_id	The identifier of the device.
queue_id	The index of the event queue to setup. The value must be in the range [0, nb_event_queues - 1] previously supplied to rte_event_dev_configure().
queue_conf	The pointer to the configuration data to be used for the event queue. NULL value is allowed, in which case default configuration used.

See also: rte_event_queue_default_conf_get()

Returns

0: Success, event queue correctly set up.
<0: event queue configuration failed

Examples: examples/eventdev_pipeline/pipeline_worker_generic.c, and examples/eventdev_pipeline/pipeline_worker_tx.c.

◆ rte_event_queue_attr_get()

int rte_event_queue_attr_get	(	uint8_t	dev_id,
		uint8_t	queue_id,
		uint32_t	attr_id,
		uint32_t *	attr_value
	)

Get an attribute from a queue.

Parameters

	dev_id	Eventdev id
	queue_id	Eventdev queue id
	attr_id	The attribute ID to retrieve
[out]	attr_value	A pointer that will be filled in with the attribute value if successful

Returns

0: Successfully returned value
-EINVAL: invalid device, queue or attr_id provided, or attr_value was NULL
-EOVERFLOW: returned when attr_id is set to RTE_EVENT_QUEUE_ATTR_SCHEDULE_TYPE and event_queue_cfg is set to RTE_EVENT_QUEUE_CFG_ALL_TYPES

◆ rte_event_port_default_conf_get()

int rte_event_port_default_conf_get	(	uint8_t	dev_id,
		uint8_t	port_id,
		struct rte_event_port_conf *	port_conf
	)

Retrieve the default configuration information of an event port designated by its port_id from the event driver for an event device.

This function intended to be used in conjunction with rte_event_port_setup() where caller needs to set up the port by overriding few default values.

Parameters

	dev_id	The identifier of the device.
	port_id	The index of the event port to get the configuration information. The value must be in the range [0, nb_event_ports - 1] previously supplied to rte_event_dev_configure().
[out]	port_conf	The pointer to the default event port configuration data

Returns

0: Success, driver updates the default event port configuration data.
<0: Error code returned by the driver info get function.

See also: rte_event_port_setup()

◆ rte_event_port_setup()

int rte_event_port_setup	(	uint8_t	dev_id,
		uint8_t	port_id,
		const struct rte_event_port_conf *	port_conf
	)

Allocate and set up an event port for an event device.

Parameters

dev_id	The identifier of the device.
port_id	The index of the event port to setup. The value must be in the range [0, nb_event_ports - 1] previously supplied to rte_event_dev_configure().
port_conf	The pointer to the configuration data to be used for the queue. NULL value is allowed, in which case default configuration used.

See also: rte_event_port_default_conf_get()

Returns

0: Success, event port correctly set up.
<0: Port configuration failed
(-EDQUOT) Quota exceeded(Application tried to link the queue configured with RTE_EVENT_QUEUE_CFG_SINGLE_LINK to more than one event ports)

Examples: examples/eventdev_pipeline/pipeline_worker_generic.c, and examples/eventdev_pipeline/pipeline_worker_tx.c.

◆ rte_event_port_attr_get()

int rte_event_port_attr_get	(	uint8_t	dev_id,
		uint8_t	port_id,
		uint32_t	attr_id,
		uint32_t *	attr_value
	)

Get an attribute from a port.

Parameters

	dev_id	Eventdev id
	port_id	Eventdev port id
	attr_id	The attribute ID to retrieve
[out]	attr_value	A pointer that will be filled in with the attribute value if successful

Returns

0: Successfully returned value
(-EINVAL) Invalid device, port or attr_id, or attr_value was NULL

◆ rte_event_dev_start()

int rte_event_dev_start ( uint8_t dev_id )

Start an event device.

The device start step is the last one and consists of setting the event queues to start accepting the events and schedules to event ports.

On success, all basic functions exported by the API (event enqueue, event dequeue and so on) can be invoked.

Parameters

dev_id Event device identifier

Returns

0: Success, device started.
-ESTALE : Not all ports of the device are configured
-ENOLINK: Not all queues are linked, which could lead to deadlock.

Examples: examples/eventdev_pipeline/pipeline_worker_generic.c, and examples/eventdev_pipeline/pipeline_worker_tx.c.

◆ rte_event_dev_stop()

void rte_event_dev_stop ( uint8_t dev_id )

Stop an event device.

This function causes all queued events to be drained, including those residing in event ports. While draining events out of the device, this function calls the user-provided flush callback (if one was registered) once per event.

The device can be restarted with a call to rte_event_dev_start(). Threads that continue to enqueue/dequeue while the device is stopped, or being stopped, will result in undefined behavior. This includes event adapters, which must be stopped prior to stopping the eventdev.

Parameters

dev_id Event device identifier.

See also: rte_event_dev_stop_flush_callback_register()

Examples: examples/eventdev_pipeline/main.c.

◆ rte_event_dev_stop_flush_callback_register()

int rte_event_dev_stop_flush_callback_register	(	uint8_t	dev_id,
		eventdev_stop_flush_t	callback,
		void *	userdata
	)

Registers a callback function to be invoked during rte_event_dev_stop() for each flushed event. This function can be used to properly dispose of queued events, for example events containing memory pointers.

The callback function is only registered for the calling process. The callback function must be registered in every process that can call rte_event_dev_stop().

To unregister a callback, call this function with a NULL callback pointer.

Parameters

dev_id	The identifier of the device.
callback	Callback function invoked once per flushed event.
userdata	Argument supplied to callback.

Returns

0 on success.
-EINVAL if dev_id is invalid

See also: rte_event_dev_stop()

◆ rte_event_dev_close()

int rte_event_dev_close ( uint8_t dev_id )

Close an event device. The device cannot be restarted!

Parameters

dev_id Event device identifier

Returns

0 on successfully closing device
<0 on failure to close device
(-EAGAIN) if device is busy

Examples: examples/eventdev_pipeline/main.c.

◆ rte_event_eth_rx_adapter_caps_get()

int rte_event_eth_rx_adapter_caps_get	(	uint8_t	dev_id,
		uint16_t	eth_port_id,
		uint32_t *	caps
	)

Retrieve the event device's ethdev Rx adapter capabilities for the specified ethernet port

Parameters

	dev_id	The identifier of the device.
	eth_port_id	The identifier of the ethernet device.
[out]	caps	A pointer to memory filled with Rx event adapter capabilities.

Returns

0: Success, driver provides Rx event adapter capabilities for the ethernet device.
<0: Error code returned by the driver function.

Examples: examples/eventdev_pipeline/pipeline_worker_generic.c, and examples/eventdev_pipeline/pipeline_worker_tx.c.

◆ rte_event_timer_adapter_caps_get()

int rte_event_timer_adapter_caps_get	(	uint8_t	dev_id,
		uint32_t *	caps
	)

Retrieve the event device's timer adapter capabilities.

Parameters

	dev_id	The identifier of the device.
[out]	caps	A pointer to memory to be filled with event timer adapter capabilities.

Returns

0: Success, driver provided event timer adapter capabilities.
<0: Error code returned by the driver function.

◆ rte_event_crypto_adapter_caps_get()

int rte_event_crypto_adapter_caps_get	(	uint8_t	dev_id,
		uint8_t	cdev_id,
		uint32_t *	caps
	)

Retrieve the event device's crypto adapter capabilities for the specified cryptodev device

Parameters

	dev_id	The identifier of the device.
	cdev_id	The identifier of the cryptodev device.
[out]	caps	A pointer to memory filled with event adapter capabilities. It is expected to be pre-allocated & initialized by caller.

Returns

0: Success, driver provides event adapter capabilities for the cryptodev device.
<0: Error code returned by the driver function.

◆ rte_event_eth_tx_adapter_caps_get()

int rte_event_eth_tx_adapter_caps_get	(	uint8_t	dev_id,
		uint16_t	eth_port_id,
		uint32_t *	caps
	)

Retrieve the event device's eth Tx adapter capabilities

Parameters

	dev_id	The identifier of the device.
	eth_port_id	The identifier of the ethernet device.
[out]	caps	A pointer to memory filled with eth Tx adapter capabilities.

Returns

0: Success, driver provides eth Tx adapter capabilities.
<0: Error code returned by the driver function.

Examples: examples/eventdev_pipeline/main.c.

◆ rte_event_enqueue_burst()

static uint16_t rte_event_enqueue_burst	(	uint8_t	dev_id,
		uint8_t	port_id,
		const struct rte_event	ev[],
		uint16_t	nb_events
	)

inlinestatic

Enqueue a burst of events objects or an event object supplied in rte_event structure on an event device designated by its dev_id through the event port specified by port_id. Each event object specifies the event queue on which it will be enqueued.

The nb_events parameter is the number of event objects to enqueue which are supplied in the ev array of rte_event structure.

Event operations RTE_EVENT_OP_FORWARD and RTE_EVENT_OP_RELEASE must only be enqueued to the same port that their associated events were dequeued from.

The rte_event_enqueue_burst() function returns the number of events objects it actually enqueued. A return value equal to nb_events means that all event objects have been enqueued.

Parameters

dev_id	The identifier of the device.
port_id	The identifier of the event port.
ev	Points to an array of nb_events objects of type rte_event structure which contain the event object enqueue operations to be processed.
nb_events	The number of event objects to enqueue, typically number of rte_event_port_attr_get(...RTE_EVENT_PORT_ATTR_ENQ_DEPTH...) available for this port.

Returns

The number of event objects actually enqueued on the event device. The return value can be less than the value of the nb_events parameter when the event devices queue is full or if invalid parameters are specified in a rte_event. If the return value is less than nb_events, the remaining events at the end of ev[] are not consumed and the caller has to take care of them, and rte_errno is set accordingly. Possible errno values include:

-EINVAL The port ID is invalid, device ID is invalid, an event's queue ID is invalid, or an event's sched type doesn't match the capabilities of the destination queue.
-ENOSPC The event port was backpressured and unable to enqueue one or more events. This error code is only applicable to closed systems.

See also: rte_event_port_attr_get(), RTE_EVENT_PORT_ATTR_ENQ_DEPTH

Examples: examples/eventdev_pipeline/pipeline_worker_generic.c, and examples/eventdev_pipeline/pipeline_worker_tx.c.

Definition at line 1385 of file rte_eventdev.h.

◆ rte_event_enqueue_new_burst()

static uint16_t rte_event_enqueue_new_burst	(	uint8_t	dev_id,
		uint8_t	port_id,
		const struct rte_event	ev[],
		uint16_t	nb_events
	)

inlinestatic

Enqueue a burst of events objects of operation type RTE_EVENT_OP_NEW on an event device designated by its dev_id through the event port specified by port_id.

Provides the same functionality as rte_event_enqueue_burst(), expect that application can use this API when the all objects in the burst contains the enqueue operation of the type RTE_EVENT_OP_NEW. This specialized function can provide the additional hint to the PMD and optimize if possible.

The rte_event_enqueue_new_burst() result is undefined if the enqueue burst has event object of operation type != RTE_EVENT_OP_NEW.

Parameters

dev_id	The identifier of the device.
port_id	The identifier of the event port.
ev	Points to an array of nb_events objects of type rte_event structure which contain the event object enqueue operations to be processed.
nb_events	The number of event objects to enqueue, typically number of rte_event_port_attr_get(...RTE_EVENT_PORT_ATTR_ENQ_DEPTH...) available for this port.

Returns

The number of event objects actually enqueued on the event device. The return value can be less than the value of the nb_events parameter when the event devices queue is full or if invalid parameters are specified in a rte_event. If the return value is less than nb_events, the remaining events at the end of ev[] are not consumed and the caller has to take care of them, and rte_errno is set accordingly. Possible errno values include:

-EINVAL The port ID is invalid, device ID is invalid, an event's queue ID is invalid, or an event's sched type doesn't match the capabilities of the destination queue.
-ENOSPC The event port was backpressured and unable to enqueue one or more events. This error code is only applicable to closed systems.

See also: rte_event_port_attr_get(), RTE_EVENT_PORT_ATTR_ENQ_DEPTH; rte_event_enqueue_burst()

Definition at line 1436 of file rte_eventdev.h.

◆ rte_event_enqueue_forward_burst()

static uint16_t rte_event_enqueue_forward_burst	(	uint8_t	dev_id,
		uint8_t	port_id,
		const struct rte_event	ev[],
		uint16_t	nb_events
	)

inlinestatic

Enqueue a burst of events objects of operation type RTE_EVENT_OP_FORWARD on an event device designated by its dev_id through the event port specified by port_id.

Provides the same functionality as rte_event_enqueue_burst(), expect that application can use this API when the all objects in the burst contains the enqueue operation of the type RTE_EVENT_OP_FORWARD. This specialized function can provide the additional hint to the PMD and optimize if possible.

The rte_event_enqueue_new_burst() result is undefined if the enqueue burst has event object of operation type != RTE_EVENT_OP_FORWARD.

Parameters

dev_id	The identifier of the device.
port_id	The identifier of the event port.
ev	Points to an array of nb_events objects of type rte_event structure which contain the event object enqueue operations to be processed.
nb_events	The number of event objects to enqueue, typically number of rte_event_port_attr_get(...RTE_EVENT_PORT_ATTR_ENQ_DEPTH...) available for this port.

Returns

The number of event objects actually enqueued on the event device. The return value can be less than the value of the nb_events parameter when the event devices queue is full or if invalid parameters are specified in a rte_event. If the return value is less than nb_events, the remaining events at the end of ev[] are not consumed and the caller has to take care of them, and rte_errno is set accordingly. Possible errno values include:

-EINVAL The port ID is invalid, device ID is invalid, an event's queue ID is invalid, or an event's sched type doesn't match the capabilities of the destination queue.
-ENOSPC The event port was backpressured and unable to enqueue one or more events. This error code is only applicable to closed systems.

See also: rte_event_port_attr_get(), RTE_EVENT_PORT_ATTR_ENQ_DEPTH; rte_event_enqueue_burst()

Definition at line 1487 of file rte_eventdev.h.

◆ rte_event_dequeue_timeout_ticks()

int rte_event_dequeue_timeout_ticks	(	uint8_t	dev_id,
		uint64_t	ns,
		uint64_t *	timeout_ticks
	)

Converts nanoseconds to timeout_ticks value for rte_event_dequeue_burst()

If the device is configured with RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT flag then application can use this function to convert timeout value in nanoseconds to implementations specific timeout value supplied in rte_event_dequeue_burst()

Parameters

	dev_id	The identifier of the device.
	ns	Wait time in nanosecond
[out]	timeout_ticks	Value for the timeout_ticks parameter in rte_event_dequeue_burst()

Returns

0 on success.
-ENOTSUP if the device doesn't support timeouts
-EINVAL if dev_id is invalid or timeout_ticks is NULL
other values < 0 on failure.

See also: rte_event_dequeue_burst(), RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT; rte_event_dev_configure()

◆ rte_event_dequeue_burst()

static uint16_t rte_event_dequeue_burst	(	uint8_t	dev_id,
		uint8_t	port_id,
		struct rte_event	ev[],
		uint16_t	nb_events,
		uint64_t	timeout_ticks
	)

inlinestatic

Dequeue a burst of events objects or an event object from the event port designated by its event_port_id, on an event device designated by its dev_id.

rte_event_dequeue_burst() does not dictate the specifics of scheduling algorithm as each eventdev driver may have different criteria to schedule an event. However, in general, from an application perspective scheduler may use the following scheme to dispatch an event to the port.

1) Selection of event queue based on a) The list of event queues are linked to the event port. b) If the device has RTE_EVENT_DEV_CAP_QUEUE_QOS capability then event queue selection from list is based on event queue priority relative to other event queue supplied as priority in rte_event_queue_setup() c) If the device has RTE_EVENT_DEV_CAP_EVENT_QOS capability then event queue selection from the list is based on event priority supplied as priority in rte_event_enqueue_burst() 2) Selection of event a) The number of flows available in selected event queue. b) Schedule type method associated with the event

The nb_events parameter is the maximum number of event objects to dequeue which are returned in the ev array of rte_event structure.

The rte_event_dequeue_burst() function returns the number of events objects it actually dequeued. A return value equal to nb_events means that all event objects have been dequeued.

The number of events dequeued is the number of scheduler contexts held by this port. These contexts are automatically released in the next rte_event_dequeue_burst() invocation if the port supports implicit releases, or invoking rte_event_enqueue_burst() with RTE_EVENT_OP_RELEASE operation can be used to release the contexts early.

Event operations RTE_EVENT_OP_FORWARD and RTE_EVENT_OP_RELEASE must only be enqueued to the same port that their associated events were dequeued from.

Parameters

	dev_id	The identifier of the device.
	port_id	The identifier of the event port.
[out]	ev	Points to an array of nb_events objects of type rte_event structure for output to be populated with the dequeued event objects.
	nb_events	The maximum number of event objects to dequeue, typically number of rte_event_port_dequeue_depth() available for this port.
	timeout_ticks	0 no-wait, returns immediately if there is no event. >0 wait for the event, if the device is configured with RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT then this function will wait until at least one event is available or timeout_ticks time. if the device is not configured with RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT then this function will wait until the event available or dequeue_timeout_ns ns which was previously supplied to rte_event_dev_configure()

Returns: The number of event objects actually dequeued from the port. The return value can be less than the value of the nb_events parameter when the event port's queue is not full.

See also: rte_event_port_dequeue_depth()

Examples: examples/eventdev_pipeline/pipeline_worker_generic.c, and examples/eventdev_pipeline/pipeline_worker_tx.c.

Definition at line 1592 of file rte_eventdev.h.

◆ rte_event_port_link()

int rte_event_port_link	(	uint8_t	dev_id,
		uint8_t	port_id,
		const uint8_t	queues[],
		const uint8_t	priorities[],
		uint16_t	nb_links
	)

Link multiple source event queues supplied in queues to the destination event port designated by its port_id with associated service priority supplied in priorities on the event device designated by its dev_id.

The link establishment shall enable the event port port_id from receiving events from the specified event queue(s) supplied in queues

An event queue may link to one or more event ports. The number of links can be established from an event queue to event port is implementation defined.

Event queue(s) to event port link establishment can be changed at runtime without re-configuring the device to support scaling and to reduce the latency of critical work by establishing the link with more event ports at runtime.

Parameters

dev_id	The identifier of the device.
port_id	Event port identifier to select the destination port to link.
queues	Points to an array of nb_links event queues to be linked to the event port. NULL value is allowed, in which case this function links all the configured event queues nb_event_queues which previously supplied to rte_event_dev_configure() to the event port port_id
priorities	Points to an array of nb_links service priorities associated with each event queue link to event port. The priority defines the event port's servicing priority for event queue, which may be ignored by an implementation. The requested priority should in the range of [RTE_EVENT_DEV_PRIORITY_HIGHEST, RTE_EVENT_DEV_PRIORITY_LOWEST]. The implementation shall normalize the requested priority to implementation supported priority value. NULL value is allowed, in which case this function links the event queues with RTE_EVENT_DEV_PRIORITY_NORMAL servicing priority
nb_links	The number of links to establish. This parameter is ignored if queues is NULL.

Returns: The number of links actually established. The return value can be less than the value of the nb_links parameter when the implementation has the limitation on specific queue to port link establishment or if invalid parameters are specified in queues If the return value is less than nb_links, the remaining links at the end of link[] are not established, and the caller has to take care of them. If return value is less than nb_links then implementation shall update the rte_errno accordingly, Possible rte_errno values are (-EDQUOT) Quota exceeded(Application tried to link the queue configured with RTE_EVENT_QUEUE_CFG_SINGLE_LINK to more than one event ports) (-EINVAL) Invalid parameter

Examples: examples/eventdev_pipeline/pipeline_worker_generic.c, and examples/eventdev_pipeline/pipeline_worker_tx.c.

◆ rte_event_port_unlink()

int rte_event_port_unlink	(	uint8_t	dev_id,
		uint8_t	port_id,
		uint8_t	queues[],
		uint16_t	nb_unlinks
	)

Unlink multiple source event queues supplied in queues from the destination event port designated by its port_id on the event device designated by its dev_id.

The unlink call issues an async request to disable the event port port_id from receiving events from the specified event queue queue_id. Event queue(s) to event port unlink establishment can be changed at runtime without re-configuring the device.

See also: rte_event_port_unlinks_in_progress() to poll for completed unlinks.

Parameters

dev_id	The identifier of the device.
port_id	Event port identifier to select the destination port to unlink.
queues	Points to an array of nb_unlinks event queues to be unlinked from the event port. NULL value is allowed, in which case this function unlinks all the event queue(s) from the event port port_id.
nb_unlinks	The number of unlinks to establish. This parameter is ignored if queues is NULL.

Returns: The number of unlinks successfully requested. The return value can be less than the value of the nb_unlinks parameter when the implementation has the limitation on specific queue to port unlink establishment or if invalid parameters are specified. If the return value is less than nb_unlinks, the remaining queues at the end of queues[] are not unlinked, and the caller has to take care of them. If return value is less than nb_unlinks then implementation shall update the rte_errno accordingly, Possible rte_errno values are (-EINVAL) Invalid parameter

◆ rte_event_port_unlinks_in_progress()

int rte_event_port_unlinks_in_progress	(	uint8_t	dev_id,
		uint8_t	port_id
	)

Returns the number of unlinks in progress.

This function provides the application with a method to detect when an unlink has been completed by the implementation.

See also: rte_event_port_unlink() to issue unlink requests.

Parameters

dev_id	The identifier of the device.
port_id	Event port identifier to select port to check for unlinks in progress.

Returns: The number of unlinks that are in progress. A return of zero indicates that there are no outstanding unlink requests. A positive return value indicates the number of unlinks that are in progress, but are not yet complete. A negative return value indicates an error, -EINVAL indicates an invalid parameter passed for dev_id or port_id.

◆ rte_event_port_links_get()

int rte_event_port_links_get	(	uint8_t	dev_id,
		uint8_t	port_id,
		uint8_t	queues[],
		uint8_t	priorities[]
	)

Retrieve the list of source event queues and its associated service priority linked to the destination event port designated by its port_id on the event device designated by its dev_id.

Parameters

	dev_id	The identifier of the device.
	port_id	Event port identifier.
[out]	queues	Points to an array of queues for output. The caller has to allocate RTE_EVENT_MAX_QUEUES_PER_DEV bytes to store the event queue(s) linked with event port port_id
[out]	priorities	Points to an array of priorities for output. The caller has to allocate RTE_EVENT_MAX_QUEUES_PER_DEV bytes to store the service priority associated with each event queue linked

Returns

The number of links established on the event port designated by its port_id.

<0 on failure.

◆ rte_event_dev_service_id_get()

int rte_event_dev_service_id_get	(	uint8_t	dev_id,
		uint32_t *	service_id
	)

Retrieve the service ID of the event dev. If the adapter doesn't use a rte_service function, this function returns -ESRCH.

Parameters

	dev_id	The identifier of the device.
[out]	service_id	A pointer to a uint32_t, to be filled in with the service id.

Returns

0: Success
<0: Error code on failure, if the event dev doesn't use a rte_service function, this function returns -ESRCH.

Examples: examples/eventdev_pipeline/pipeline_worker_generic.c, and examples/eventdev_pipeline/pipeline_worker_tx.c.

◆ rte_event_dev_dump()

int rte_event_dev_dump	(	uint8_t	dev_id,
		FILE *	f
	)

Dump internal information about dev_id to the FILE* provided in f.

Parameters

dev_id	The identifier of the device.
f	A pointer to a file for output

Returns

0: on success
<0: on failure.

Examples: examples/eventdev_pipeline/main.c.

◆ rte_event_dev_xstats_names_get()

int rte_event_dev_xstats_names_get	(	uint8_t	dev_id,
		enum rte_event_dev_xstats_mode	mode,
		uint8_t	queue_port_id,
		struct rte_event_dev_xstats_name *	xstats_names,
		unsigned int *	ids,
		unsigned int	size
	)

Retrieve names of extended statistics of an event device.

Parameters

	dev_id	The identifier of the event device.
	mode	The mode of statistics to retrieve. Choices include the device statistics, port statistics or queue statistics.
	queue_port_id	Used to specify the port or queue number in queue or port mode, and is ignored in device mode.
[out]	xstats_names	Block of memory to insert names into. Must be at least size in capacity. If set to NULL, function returns required capacity.
[out]	ids	Block of memory to insert ids into. Must be at least size in capacity. If set to NULL, function returns required capacity. The id values returned can be passed to rte_event_dev_xstats_get to select statistics.
	size	Capacity of xstats_names (number of names).

Returns

positive value lower or equal to size: success. The return value is the number of entries filled in the stats table.
positive value higher than size: error, the given statistics table is too small. The return value corresponds to the size that should be given to succeed. The entries in the table are not valid and shall not be used by the caller.
negative value on error: -ENODEV for invalid dev_id -EINVAL for invalid mode, queue port or id parameters -ENOTSUP if the device doesn't support this function.

◆ rte_event_dev_xstats_get()

int rte_event_dev_xstats_get	(	uint8_t	dev_id,
		enum rte_event_dev_xstats_mode	mode,
		uint8_t	queue_port_id,
		const unsigned int	ids[],
		uint64_t	values[],
		unsigned int	n
	)

Retrieve extended statistics of an event device.

Parameters

	dev_id	The identifier of the device.
	mode	The mode of statistics to retrieve. Choices include the device statistics, port statistics or queue statistics.
	queue_port_id	Used to specify the port or queue number in queue or port mode, and is ignored in device mode.
	ids	The id numbers of the stats to get. The ids can be got from the stat position in the stat list from rte_event_dev_get_xstats_names(), or by using rte_event_dev_xstats_by_name_get().
[out]	values	The values for each stats request by ID.
	n	The number of stats requested

Returns

positive value: number of stat entries filled into the values array
negative value on error: -ENODEV for invalid dev_id -EINVAL for invalid mode, queue port or id parameters -ENOTSUP if the device doesn't support this function.

◆ rte_event_dev_xstats_by_name_get()

uint64_t rte_event_dev_xstats_by_name_get	(	uint8_t	dev_id,
		const char *	name,
		unsigned int *	id
	)

Retrieve the value of a single stat by requesting it by name.

Parameters

	dev_id	The identifier of the device
	name	The stat name to retrieve
[out]	id	If non-NULL, the numerical id of the stat will be returned, so that further requests for the stat can be got using rte_event_dev_xstats_get, which will be faster as it doesn't need to scan a list of names for the stat. If the stat cannot be found, the id returned will be (unsigned)-1.

Returns

positive value or zero: the stat value
negative value: -EINVAL if stat not found, -ENOTSUP if not supported.

Examples: examples/eventdev_pipeline/main.c.

◆ rte_event_dev_xstats_reset()

int rte_event_dev_xstats_reset	(	uint8_t	dev_id,
		enum rte_event_dev_xstats_mode	mode,
		int16_t	queue_port_id,
		const uint32_t	ids[],
		uint32_t	nb_ids
	)

Reset the values of the xstats of the selected component in the device.

Parameters

dev_id	The identifier of the device
mode	The mode of the statistics to reset. Choose from device, queue or port.
queue_port_id	The queue or port to reset. 0 and positive values select ports and queues, while -1 indicates all ports or queues.
ids	Selects specific statistics to be reset. When NULL, all statistics selected by mode will be reset. If non-NULL, must point to array of at least nb_ids size.
nb_ids	The number of ids available from the ids array. Ignored when ids is NULL.

Returns

zero: successfully reset the statistics to zero
negative value: -EINVAL invalid parameters, -ENOTSUP if not supported.

◆ rte_event_dev_selftest()

int rte_event_dev_selftest ( uint8_t dev_id )

Trigger the eventdev self test.

Parameters

dev_id The identifier of the device

Returns

0: Selftest successful
-ENOTSUP if the device doesn't support selftest
other values < 0 on failure.

Data Structures

Macros

Typedefs

Enumerations

Functions

Detailed Description

Macro Definition Documentation

◆ RTE_EVENT_DEV_CAP_QUEUE_QOS

◆ RTE_EVENT_DEV_CAP_EVENT_QOS

◆ RTE_EVENT_DEV_CAP_DISTRIBUTED_SCHED

◆ RTE_EVENT_DEV_CAP_QUEUE_ALL_TYPES

◆ RTE_EVENT_DEV_CAP_BURST_MODE

◆ RTE_EVENT_DEV_CAP_IMPLICIT_RELEASE_DISABLE

◆ RTE_EVENT_DEV_CAP_NONSEQ_MODE

◆ RTE_EVENT_DEV_CAP_RUNTIME_PORT_LINK

◆ RTE_EVENT_DEV_CAP_MULTIPLE_QUEUE_PORT

◆ RTE_EVENT_DEV_PRIORITY_HIGHEST

◆ RTE_EVENT_DEV_PRIORITY_NORMAL

◆ RTE_EVENT_DEV_PRIORITY_LOWEST

◆ RTE_EVENT_DEV_ATTR_PORT_COUNT

◆ RTE_EVENT_DEV_ATTR_QUEUE_COUNT

◆ RTE_EVENT_DEV_ATTR_STARTED

◆ RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT

◆ RTE_EVENT_QUEUE_CFG_ALL_TYPES

◆ RTE_EVENT_QUEUE_CFG_SINGLE_LINK

◆ RTE_EVENT_QUEUE_ATTR_PRIORITY

◆ RTE_EVENT_QUEUE_ATTR_NB_ATOMIC_FLOWS

◆ RTE_EVENT_QUEUE_ATTR_NB_ATOMIC_ORDER_SEQUENCES

◆ RTE_EVENT_QUEUE_ATTR_EVENT_QUEUE_CFG

◆ RTE_EVENT_QUEUE_ATTR_SCHEDULE_TYPE

◆ RTE_EVENT_PORT_ATTR_ENQ_DEPTH

◆ RTE_EVENT_PORT_ATTR_DEQ_DEPTH

◆ RTE_EVENT_PORT_ATTR_NEW_EVENT_THRESHOLD

◆ RTE_SCHED_TYPE_ORDERED

◆ RTE_SCHED_TYPE_ATOMIC

◆ RTE_SCHED_TYPE_PARALLEL

◆ RTE_EVENT_TYPE_ETHDEV

◆ RTE_EVENT_TYPE_CRYPTODEV

◆ RTE_EVENT_TYPE_TIMER

◆ RTE_EVENT_TYPE_CPU

◆ RTE_EVENT_TYPE_ETH_RX_ADAPTER

◆ RTE_EVENT_TYPE_MAX

◆ RTE_EVENT_OP_NEW

◆ RTE_EVENT_OP_FORWARD

◆ RTE_EVENT_OP_RELEASE

◆ RTE_EVENT_ETH_RX_ADAPTER_CAP_INTERNAL_PORT

◆ RTE_EVENT_ETH_RX_ADAPTER_CAP_MULTI_EVENTQ

◆ RTE_EVENT_ETH_RX_ADAPTER_CAP_OVERRIDE_FLOW_ID

◆ RTE_EVENT_TIMER_ADAPTER_CAP_INTERNAL_PORT

◆ RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_NEW

◆ RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_FWD

◆ RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_QP_EV_BIND

◆ RTE_EVENT_CRYPTO_ADAPTER_CAP_SESSION_PRIVATE_DATA

◆ RTE_EVENT_ETH_TX_ADAPTER_CAP_INTERNAL_PORT

◆ RTE_EVENT_DEV_XSTATS_NAME_SIZE

Typedef Documentation

◆ eventdev_stop_flush_t

Enumeration Type Documentation

◆ rte_event_dev_xstats_mode

Function Documentation

◆ rte_event_dev_count()

◆ rte_event_dev_get_dev_id()

◆ rte_event_dev_socket_id()

◆ rte_event_dev_info_get()

◆ rte_event_dev_attr_get()

◆ rte_event_dev_configure()

◆ rte_event_queue_default_conf_get()

◆ rte_event_queue_setup()

◆ rte_event_queue_attr_get()

◆ rte_event_port_default_conf_get()

◆ rte_event_port_setup()

◆ rte_event_port_attr_get()

◆ rte_event_dev_start()

◆ rte_event_dev_stop()

◆ rte_event_dev_stop_flush_callback_register()

◆ rte_event_dev_close()

◆ rte_event_eth_rx_adapter_caps_get()

◆ rte_event_timer_adapter_caps_get()

◆ rte_event_crypto_adapter_caps_get()

◆ rte_event_eth_tx_adapter_caps_get()